Conveying and dust control
Conveying Systems
Equipment that moves product and controls dust before and after the filling line. Horizontal and vertical conveying are sized in one project: capacity, distance and product behaviour together.
35,000 m³/h
aspirator airflow
100 m³/h
screw capacity
110 t/h
elevator capacity
40 m
modular casing
Products

Centrifugal Aspirator
Captures dust at the source. Keeps the line clean. Single-inlet radial extraction for grain, feed, flour, wood and chemical dust. Airflow, pressure and motor are sized together, never the casing alone.
View ›
Screw Conveyor
Open U-trough or closed tube. One conveying principle. The rotating screw moves product through the trough or tube. U-troughs open for cleaning and inspection; tubes contain dust.
View ›
Bucket Elevator
Lifts bulk product up. Leaves the floor free. Vertical handling of grain, pulses and oilseed. Six bucket series are selected to suit project capacity and height.
View ›
Z Elevator
Two directions, one casing. One machine links a horizontal inlet, a vertical run and an upper horizontal outlet. Upright buckets reduce breakage in fragile seeds, pulses and granules.
View ›
Which equipment goes where?
A screw conveyor handles horizontal runs, a bucket elevator handles vertical lift. The Z elevator merges both in one casing and removes the transfer point.
The centrifugal aspirator does not move product; it captures dust at the source. It keeps filling and packing areas clean.
- ›Horizontal: screw conveyor, 1 – 100 m³/h.
- ›Vertical: bucket elevator, 10 – 110 t/h.
- ›Horizontal + vertical: Z elevator, 10 – 40 m³/h.
- ›Dust control: centrifugal aspirator, up to 35,000 m³/h.
How to choose a conveying system
First the route: horizontal only, vertical only, or both? Then the hourly capacity and the bulk density of the product.
For fragile products, bucket type and drop height matter; for abrasive products, material and wear lining; for dusty products, a closed casing and an aspirator.
Material options
Casings and contact surfaces are St37 steel, galvanized sheet, Z450 or AISI 304 / 316 stainless steel. Food production favours PP buckets and AISI 304 casings.
Frequently asked questions
Which equipment suits horizontal conveying?+
A screw conveyor moves 1 – 100 m³/h horizontally. The open U-trough suits cleaning, the closed tube suits dust control.
What covers vertical lift?+
A bucket elevator runs 10 – 110 t/h with a standard height of 5 – 12 m. Modular casing reaches higher lines.
How is dust controlled?+
The centrifugal aspirator captures dust at the source. Airflow, pressure and motor are sized together.
Is food-safe material available?+
AISI 304 / 316 stainless steel casings and PP buckets are available.
Conveying Systems
Bulk conveying and dust control: centrifugal aspirator up to 35,000 m³/h, screw conveyor 1–100 m³/h, bucket elevator 10–110 t/h, Z elevator 10–40 m³/h.
