RAST Logo

Vertical conveying

Bucket Elevator

Lifts bulk product up. Leaves the floor free. Vertical handling of grain, pulses and oilseed. Six bucket series are selected to suit project capacity and height.

110 t/h

up to capacity

40 m

modular casing

0.25 – 4.75 L

bucket volume

Z450 & AISI 304

casing

How is the bucket series chosen?

Bucket volume, belt width and speed set the capacity together. The six series cover 10 to 110 t/h.

Conveying height and bulk density narrow the choice. The modular casing can be extended or shortened as site heights change.

  • ›Bucket volume: 0.25 – 4.75 L.
  • ›Belt width: 120 – 350 mm.
  • ›Belt speed: 1.5 – 2.5 m/s.

Which products does it lift?

Grain, pulses and oilseed are the main vertical duties. Wear parts are PA 6 or PE-UHMW; the casing is galvanized sheet, Z450 or AISI 304.

Because the casing is modular, the plant does not need high structures: the elevator gathers the vertical run in one column and leaves the floor free.

Maintenance and durability

Tensile strength is selected between 400 and 1000 N/mm. Worn parts are replaced module by module; belt tension and bucket fixings sit on the periodic checklist.

Highlights

  • Six bucket sizes
  • Modular casing
  • Galvanized sheet, Z450 & AISI 304
  • PA 6 / PE-UHMW wear parts
  • 1.5 – 2.5 m/s belt speed
  • Capacity and height per project

Technical specifications

Bucket volume
0.25 – 4.75 L
Belt width
120 – 350 mm
Belt speed
1.5 – 2.5 m/s
Capacity
10 – 110 t/h
Conveying height
5 – 12 m
Body
Galvanized sheet, Z450 & AISI 304
Wear parts
PA 6 / PE-UHMW
Tensile strength
400 – 1000 N/mm

Frequently asked questions

What is the capacity range?+

Capacity is stated from 10 to 110 t/h. Bucket volume, belt width and speed are selected together.

How high can it convey?+

Standard conveying height is 5 – 12 m. Taller runs with modular casing are planned per project.

Which products suit it?+

Bulk products such as grain, pulses and oilseed.

What is the casing material?+

Galvanized sheet, Z450 and AISI 304 options. Wear parts are PA 6 or PE-UHMW.

Bucket Elevator

Bucket elevator for bulk product: 10–110 t/h capacity, 0.25–4.75 L bucket volume, 120–350 mm belt width, galvanized sheet and Z450 / AISI 304 casing.