Screw Conveyor Capacity Calculation
Capacity depends on three values: diameter, pitch and speed. Density converts the result into tonnage.
Technical summary
Dia × pitch
geometry
Speed
rate
Fill factor
factor
Incline
limit
The three variables
Capacity is roughly section area × pitch × speed × density × fill factor; fill is chosen between 15% and 45% by flowability.
Incline reduces capacity and loses meaningfully above 20 degrees; dusty products also cap the speed.
- ✓Diameter and pitch
- ✓Speed and fill factor
- ✓Bulk density
- ✓Incline correction
Frequently asked questions
What drives capacity?+
Diameter, pitch, speed, density and fill; incline adds correction.
Which fill factor?+
Lower for free-flowing, higher for granular; 15-45% is common.
Is speed limited for dust?+
Yes, dust and wear favour lower speed.
Related pages
Let us size your conveyor
Share product, tonnage, distance and incline.
