Fully Automatic Filling Machine
On a fully automatic line the bottle travels on a conveyor and filling, capping and labelling finish without operator handling.
Technical summary
0.5%
filling accuracy
60 L/min
up to capacity
AISI 304/316
stainless steel
4
SORM models
What the line contains
A typical line has bottle feeding, filling, capping, labelling and an outfeed conveyor. The slowest station sets the line speed.
SORM Master fills up to 60 litres per minute. When product preparation is also needed, SORM Mix&Go joins with PLC control and SCADA integration.
- ✓Conveyor bottle flow
- ✓Synchronised fill, cap and label
- ✓PLC control and SCADA integration
- ✓Recipe-driven product change
When to automate
Three signals: shift output falls short, operator cost exceeds machine cost, capping or labelling becomes the bottleneck.
With only one signal, staying semi-automatic is wiser; a second nozzle often adds capacity at half the cost of a line.
Installation and commissioning
Installation starts with the floor plan, power and air supply. Each station is tested alone, then the line runs as a whole.
Operator training and recipe setup are part of commissioning; maintenance covers nozzles, seals and conveyor alignment.
Frequently asked questions
How much floor space?+
It depends on station count; the floor plan comes with the quote.
Can my existing machine join a line?+
It can be evaluated if capacity and connections match.
How many operators?+
Usually one; pack feeding may be separate.
How long is a product change?+
Minutes with a stored recipe, longer if nozzles must change.
Let us test your product
Share the viscosity, packaging and daily volume; our engineers will propose the right SORM model and filling configuration.